Pool builders by city
Best Pool Builders in Delray Beach, FL
Pool builders serving Delray Beach. Two local rules do most of the work here: what a zero lot line plat allows a pool to do, and what a historic district asks of the fence around it. Start with the shortlist, then check your plat.
5 listings here 2 based here
Palm Beach County
Endless Summer Pools of Florida, Inc.
6.3
FloridaPoolz Score
DBPR verified
Since 2015
Also serving this area
These pool builders are not based in Delray Beach and don't emphasize their services here, but they've shown they work here, too — so check them out, too!
Not sure who to ask?
Tell us what your dream pool is all about, and where do you want it. We'll do our best to find a professional pool builder for your project.
Pool builders in Delray Beach
A handful of builders are based in the city, with a good many more covering it from elsewhere in Palm Beach County. Delray is a small city with a dense downtown, a barrier island, two historic districts and a good deal of zero lot line subdivision behind it, so the rules that apply vary more from street to street than the size of the place suggests.
Search “pool builders near me” from a Delray address and Boynton Beach and Boca Raton companies appear alongside the local ones. All can build here. The differentiator is whether they have read your plat.
What a zero lot line plat changes
This is the first thing to establish, and it is genuinely useful news for the right lot. Under the city's land development regulations, in a zero lot line development a swimming pool at grade level may extend into the interior side setback — but no closer than five feet from the property line.
That is more latitude than a standard plat gives. The catch sits immediately behind it: a screened or other pool enclosure is not permitted to encroach into setback areas in the same way. So the pool can reach in and the cage cannot, and a design that treats them as one envelope will not survive review.
Historic districts and the fence
Delray has designated historic districts, including the Old School Square Historic Arts District and the West Settlers Historic District, and exterior work inside them goes to the Historic Preservation Board.
What catches homeowners is that the pool barrier is treated as design rather than as hardware. Swimming pool fences are to be designed so the layout integrates with the lot and the structures, without a utilitarian or stand-alone appearance. Fences and walls over four feet are not allowed in front or side street setbacks at all.
In practice that means the cheapest compliant barrier is frequently not an option inside a district, and the barrier belongs in the design conversation from the beginning rather than being specified at the end.
What has to be on the plans
- The pool against the plat and the setbacks
- The enclosure shown separately
- Barrier design, not just barrier height
- Compliance shown clearly before a permit issues
No building permit issues for a family pool unless the plans submitted to the building official clearly show provision to comply. Clearly is the operative word: implied compliance is what gets a set returned.
The order to run it in
- Establish whether the plat is zero lot line
- Check whether the district is designated
- Draw the pool and the cage separately
- Design the barrier, do not just pick one
- File with compliance shown on the plans
- Inspections through to final
What moves the price here
| Driver | What it does to the number |
|---|---|
| Zero lot line plat | Changes what the pool may reach, but not the cage |
| Historic designation | Preservation review, and a designed barrier |
| Barrier design | A design item inside a district, not a hardware choice |
| Shell type and finish | The biggest single lever |
| Access to the rear | Tight lots price plant by the day |
Read the plat before the brochure
Find out whether your subdivision is a zero lot line plat before you look at a single design. It changes the buildable envelope in a way that no amount of clever layout replaces, and it is a single line on the survey.
Then, if the address is inside a district, ask the builder to show you a barrier they have had approved by the preservation board here. Not a photograph of a nice fence — one that went through this process. That is a much better test than asking whether they are familiar with historic review.
Which features suit a pool here
Small lots, a walkable downtown and a barrier island shape the answer.
A spa or a sun shelf buys usable water where the shell has to be short, and the deck is most of what you look at on a compact lot. Lighting earns its place in a walled courtyard yard.
A cage needs checking against the setback separately from the pool, for the reason above. A saltwater system suits year-round use on this coast. What we would not design on a zero lot line lot is anything that assumes the cage can follow the pool into the side setback, which is the single most common redraw in this city.
Where the rules change nearby
Boynton Beach is immediately north with its own department and a different mix of housing. Boca Raton is south, larger, and known for a stricter design review culture. Wellington is inland and equestrian, where acreage and access replace the tight-lot problem entirely.
Questions people ask
Can a pool go into the side setback in Delray Beach?
In a zero lot line development, a swimming pool at grade level may extend into the interior side setback, but no closer than five feet from the property line. That latitude does not extend to a screened or other pool enclosure, which may not encroach into setback areas the same way. Check which plat type your subdivision is.
Does the screen enclosure follow the same rule as the pool?
No, and this is the most common design mistake here. The pool at grade gets latitude in a zero lot line development; the enclosure does not. Draw the two separately from the start, because a layout that treats the pool and the cage as one envelope will not survive plan review.
What do historic districts require for a pool fence?
Swimming pool fences are to be designed so the layout integrates with the lot and the structures without exhibiting a utilitarian or stand-alone appearance, and fences and walls over four feet are not allowed in front or side street setbacks. Inside the Old School Square Historic Arts District or the West Settlers Historic District, the barrier is a design item reviewed by the preservation board.
What has to be shown on the plans?
No building permit issues for a family pool unless the plans submitted to the building official clearly show provisions to comply with the applicable requirements. That means the pool against the plat and setbacks, the enclosure shown separately, and barrier design rather than just barrier height. Implied compliance gets a set returned.
What makes one Delray Beach pool quote higher than another?
Whether the plat is zero lot line, whether the address is inside a designated historic district and needs a designed barrier, how a machine reaches the rear of a tight lot, and shell type and finish. Ask each builder what they assumed about the plat and the district.
What should I check on the state register before hiring?
On the state license lookup, check that the license is current rather than merely listed, and read the disciplinary section rather than skimming past it. A lapsed or restricted license is the single clearest signal available to a homeowner, and it costs nothing to find.
Should I just use the “near me” search results?
Proximity is doing most of the work in a “near me” result, so Boynton Beach and Boca Raton companies appear alongside the Delray-based ones. That is fine as a starting point. It just means the ordering reflects where an office happens to sit rather than what the company's license standing and review record look like, which is what this page ranks on.
Nearby cities
If you didn't find a pool builder for your Delray Beach passion project here, check out the neighbours: professional pool builders usually don't mind travelling a few miles to help new customers with the most exciting projects.