Pool builders by city
Best Pool Builders in Melbourne, FL
Pool builders serving Melbourne. The setback that shapes most designs here is five feet, and it applies to the screen enclosure exactly as it does to the pool. Start with the shortlist, then measure your own survey.
6 listings here 4 based here
Brevard County
Intercoastal Pool & Spa Builder, Inc.
7.1
FloridaPoolz Score
DBPR verified
Since 1992
Also serving this area
These pool builders are not based in Melbourne and don't emphasize their services here, but they've shown they work here, too — so check them out, too!
Not sure who to ask?
Tell us what your dream pool is all about, and where do you want it. We'll do our best to find a professional pool builder for your project.
Pool builders in Melbourne
A handful of builders are based in the city, with a few more covering it from elsewhere on the Space Coast. That is a healthy field for a city this size, helped by steady growth along the coast and a housing stock that spans several decades.
Search “pool builders near me” from a Melbourne address and West Melbourne, Palm Bay and Satellite Beach companies come back too. They can all build here, but Melbourne, West Melbourne and Palm Bay each run separate building departments, so the office and the fee schedule change with the line.
The five feet that shapes the design
Brevard sets a minimum five-foot setback for a swimming pool, and — this is the part that matters — the same five feet for a pool screen enclosure. Not the shell alone.
On a standard suburban lot that pairing does most of the design work. It means the usable envelope is not the space between the house and the fence, it is that space minus five feet on each side that a cage will eventually need. A design that fits the pool perfectly and treats the enclosure as a later decision is a design that gets redrawn.
What a variance actually involves
Any encroachment on the required setbacks needs a variance, requested through the Community Development Department. That is a process with a hearing at the end of it, not a form that gets initialled.
Which is why the practical advice runs the other way round from what people expect: it is almost always faster to design inside the five feet than to design outside it and ask permission. A variance is a legitimate route when a lot genuinely cannot take a reasonable pool otherwise. It is a poor substitute for measuring first.
Inside the plan review
- Setbacks, for the pool and the enclosure
- Drainage across the lot
- Electrical bonding and GFCI protection
- Barrier compliance under the state safety act
The city building section takes the questions directly on 321-608-7915, and a call before design costs nothing.
The order to run it in
- Pull the survey and mark the five-foot line
- Draw the cage envelope, not just the pool
- Confirm the city, West Melbourne or the county
- Settle drainage before submittal
- File, then plan review
- Inspections through to final
What moves the price here
| Driver | What it does to the number |
|---|---|
| The cage envelope | Takes the same five feet the pool does |
| A variance, if needed | Time and a hearing rather than a fee |
| Shell type and finish | The biggest single lever |
| Access to the rear | Machine time and truck movements |
| Which department has the lot | Different fees either side of a line |
Put the cage on the first sketch
Have the builder put the cage on the very first sketch, even if you are unsure whether you want one. It costs nothing at that stage and it settles the geometry of everything else.
On this coast most pools end up screened eventually, and the ones that were not planned for it are the ones where the enclosure ends up smaller than it should be, or does not fit at all without a variance nobody budgeted for.
Which features suit a pool here
A coastal county with insects, salt air and a real if short winter narrows the list sensibly.
The cage is the first decision rather than the last, for the setback reason above and because it changes how much sun reaches the water. Heating earns its place on a screened pool that loses the low winter sun, and a spa extends the usable months further.
A saltwater system suits year-round use, though on this coast the equipment pad sits in salt air regardless and wants rinsing. Lighting does more under a cage than in the open. What we would skip on a standard Melbourne lot is an infinity edge, which needs a grade change and a view that a flat inland-of-the-barrier-island lot does not have.
Where the rules change nearby
Satellite Beach and the barrier island communities sit east across the lagoon with their own city halls. Merritt Island is unincorporated, so Brevard County reviews there rather than a city. Titusville is north with its own department again, and Vero Beach is south in Indian River, where one shared division serves the city and the county together.
Questions people ask
How close to the property line can a pool go in Melbourne?
The minimum setback is five feet, and the same five feet applies to a pool screen enclosure as well as to the pool itself. That pairing is what shapes most designs here, because the usable envelope is the space between the house and the boundary minus what a cage will need on each side.
Does the screen enclosure have the same setback as the pool?
Yes. Brevard's five-foot minimum covers the pool screen enclosure as well as the pool, which is why the cage belongs on the first sketch. A layout that fits the shell perfectly and adds an enclosure later frequently does not fit at all.
What if my lot cannot take a pool inside the setbacks?
Any encroachment on the required setbacks needs a variance, requested through the Community Development Department, and that means a hearing rather than a form. It is a legitimate route where a lot genuinely cannot take a reasonable pool otherwise, but designing inside the five feet is almost always faster.
Does the city or Brevard County issue my Melbourne pool permit?
The City of Melbourne issues for addresses inside city limits. West Melbourne and Palm Bay run their own separate departments, and unincorporated areas such as Merritt Island fall to Brevard County. Confirm from the survey rather than the mailing address, because the fee schedule changes with the office.
What makes one Melbourne pool quote higher than another?
Whether the cage was designed in from the start, whether a variance is needed, shell type and finish, how a machine reaches the back of the lot, and which department has the address. Ask each builder to show the enclosure on the plan so you are comparing the same geometry.
How do I confirm a builder is licensed to work in Melbourne?
Look for an active Certified Pool/Spa Contractor license, or a Certified Building Contractor license whose scope reaches pools. Both are state-level and both are searchable on the DBPR register. Ten minutes there is the cheapest protection available on a five-figure job.
How is this list different from a “near me” search?
Partly the same companies, in a different order. A “near me” result leans on distance and profile activity, so West Melbourne, Palm Bay and Satellite Beach companies appear alongside the Melbourne-based ones. This list is assembled from license standing, what customers wrote and the work each builder can show, so a quiet company with a long record is not buried by a louder one.
Nearby cities
If you didn't find a pool builder for your Melbourne passion project here, check out the neighbours: professional pool builders usually don't mind travelling a few miles to help new customers with the most exciting projects.